Third Scientific Seminar for Engineering College organized by Chemical Engineering Department, 1441 H Dr. Mudassir Hasan from the chemical engineering department presented on the topic “Adsorptive  Removal of Azo Dye Using Polyaniline/Activated Carbon Composite” in the faculty seminar program of the College of Engineering, King Khalid University on 22/10/2019. He discussed in detail about the topic. He emphasized the synthesis process of polymer composites and polymer nanocomposites. Also, he presented his newly done research on Polyaninline/Activated carbon composite. The composite was used successfully to remove azo dyes from the wastewater which was published in Polymer Testing. He stressed that further research is needed to find new cheap polymeric composite to solve water pollution issues.      

  Clean Energy and  Promising Oooprtunities Forum 2019 The Electrical Engineering Department would like to congratulate Dr.Abdelaziz Salah Khelifa Saidi for his participation in Clean Energy and Promising Opportunities Forum 2019 on Thursday 24/10/2019. The Forum was organized by the Saudi Electricity Company (SEC) to produce Continuous Reliable Clean & Safe Electric Energy utilizing the best available fuels and fuel treatments to protect the environment and public health in line with the Kingdom’s Vision 2030. Dr.Abdelaziz presented his technical paper titled “Influence of PV Generation on Voltage Stability in Tunisian Distribution Network”. The Forum was attended by a number of experienced individuals from Siemens Gas & Power, GE Power Services, KFUPM, SEC, Farabi Petrochemical Company and many more. During the felicitation ceremony, Dr.Abdelaziz was praised by various dignitaries for his contribution to the field.  

  Second Seminar Title: How to be prolific Publisher It is difficult for much academic staff to publish research articles in reputable journals. The fact is that they are capable of doing it but lack the basic knowledge about research and publications.  This seminar was aimed to introduce the academic staff with the basic information of research and publications and then motivate them to be a prolific publisher. The seminar was divided into two sections with the first section highlighting the necessity of research and publications along with providing the information related to different journals, impact factors, indexes, etc. The second part of the seminar was focussed to elaborate on how to write a good research article and what are factors to be considered.  The response of the academic staff was good after the seminar as many of them requested the slides for their reference.    

  Amir Asir visits the University College of Engineering R.H. Prince Turki bin Talal bin Abdulaziz, Amir Asir Region, visited the College of Engineering at King Khalid University on Tuesday 8/10/2019. He was received by the rector, Prof. Faleh bin Raja Allah Al-Salami, the dean of the College of Engineering, Dr. Ibrahim Al-Falki, the vice dean for academic affairs. Dr. Mohammed Khaloofah Al Mesfer and the vice-rectors of the university and the staff of the College, in the presence of the Secretary of the Asir Region, Dr. Walid Al-Humaidi. At the beginning of the visit, His Highness was briefed on the college labs and the possibilities available to engineering students. He also visited one of the teaching rooms to discuss the students of the hall about their specialization and study progress. Later, R.H. Prince Turki bin Talal bin Abdulaziz met with the faculty members, students, and students at the college. During the meeting, they talked about the urban landscape of Asir, and the roles, aspirations, and efforts of the Department of Architecture at the College of Engineering. The meeting also witnessed the presence of representatives of the Saudi Council of Engineers in the Asir region, as well as members of the Asir Development Authority and representatives of a number of bodies in Asir.

  First Scientific Seminar for Engineering College organized by the Electrical Engineering Department, 1441 H A Seminar titled “Automated detection of oral pre-cancerous lesions using deep learning for early diagnosis of oral cavity cancer” was hosted by Dr. Mohammed Zubair Shamim from the Electrical Engineering Department for the College of Engineering on Wednesday 2/10/2019. The seminar was attended by all Chairman’s, faculty members, and students from engineering college. The presentation focused on the diagnosis of different types of benign and malignant oral cavity cancer using Artificial Intelligence (AI) through Deep Learning. At the end of presentation during the Q&A session, most of the faculty members placed queries which added to the main goal of the seminar i.e., the Teaching-Learning Process. Finally, all the chairman’s and faculty members praised Dr. Zubair for his contribution and efforts in making the seminar fruitful.      

  One of KKU's programs dedicated to training outside the Kingdom is a summer internship in the United States and represents a partnership between KKU and Purdue University. The PAGE program (Purdue Academic Global Engineering) completes six weeks at Purdue University. Purdue University is located in Indianapolis, west of Lafayette. This program is one of the best program for engineering students at King Khalid University. One of the benefits of this program is to provide courses and lectures to students in English during the first week at Purdue University, and then field visits to some factories and international laboratories. First Day: Arrival in Chicago Second  day: Reception Next days: Lectures and visits Third week: Lectures and visits ​Fourth week: Lectures and visits Fifth week: Lectures and visits Sixth week: Lectures and visits In the end, the students of the summer training expressed their deep happiness with what they have gained from this experience full of knowledge, knowledge, and fun and it was an unforgettable experience for all students.

The department of civil Engineering participated in community service for Heritage Archaeological Site, Ahad Rufaida, Aseer Province, Kingdom of Saudi Arabia. This investigation was carried out according to request Dr. Ali Marzuk. The survey work was conducted under Supervision of Dr Ibrahim Falqi (Dean,College of Engineering) and Dr Nabel Ben Kahla(Chairman, Civil Department) and was undertaken by Dr Khalid Kheder (Assistant Professor) and Engineer Saiful Islam (Lecturer) along with students Ahmed Mohammed Ahmed Sharqi , Majid Abdu Mohammed Arishi , Abdullah Mohammad Hussain ,Abdulaziz Abdullah Alyami , Mohammed Mohammed Maher Beiruti , Mehmood Mazin Mehmood Hindavi. Field survey Conducted (Three days): 23-October-2018; 30- October -2018; 1- November -2018  Objectives:   To establish the elevation level on the excavated site with the help of known established benchmark  To prepare the layout map of the excavated site by collecting data using electronic theodolite and auto-level equipment.

  "The importance of upgrading the profession of the engineer and raise the level and encourage creativity and innovation to achieve an internationally recognized position of the Saudi engineer, and then his role in development, the Kingdom is witnessing a comprehensive renaissance and accelerated development and economic reforms stimulate the aspiration for a promising future and renewed prosperity", Dr. Ibrahim bin Idris Falqi The Dean of the College of Engineering addressed these words during the opening of the seventh engineering day activities in the presence of the College's Vice Deans and a large number of faculty members and students at the headquarters of the Faculty of Engineering at the University.  Discussions focused on the services, conferences, seminars and courses that the college evaluates and offers, how to benefit from them by the students and how to involve them, in addition to talking about the link between engineering graduates in their entirety after graduation and the services and facilities available to them. Then the Dean, with the participation of the agents and heads of the departments of the college, held an open meeting with the students to answer the questions and of the students.  Among the activities of this day were the graduation projects and a set of posters for the students of the Faculty in different engineering disciplines, were discussed and evaluated these projects by the scientific committees in the various engineering departments.  Under the title of "my professional experience", the Dean of the College conducted a panel discussion in which he hosted Dr. Mohammed Bin Abdullah Al Dahm, the Vice Dean of King Khalid University for Projects. The guest spoke about his personal professional experience in studying engineering and his work in design and implementation of university facilities and facilities, technical support for the development and improvement of facilities and infrastructure to ensure a high quality academic environment. The guest also urged graduate students to explore the various doors available to them to obtain an initial job opportunity that will be an incentive and motivation to improve and develop them in the future.  The Dean of the College, along with the Vice Dean for Academic Affairs and the Vice Dean for Development and Quality, responded to the students' questions. The speakers gathered on the competency of the Saudi graduate and his ability to compete for a job, in addition to the development of skills and create an attractive and stable work environment for new graduates and that the newly graduated to prepare for work in remote places specially in the beginning to get and gain skills and experience.  The seventh engineering day concluded with a training course for graduate students under the title "Five-Balance" presented by Eng. Ahmed Bakhoutheh at the invitation of the Training Unit and Alumni at the College.  

  Each semester the Faculty of Engineering under the supervision of the Dean of the College Dr. Ibrahim Falki arranges the industrial field visits. In this semester also a group of graduating students of the Department of Chemical Engineering visited to Aramco Strategic Storage Company on 09th April, 2019 in Abha under the supervision of Dr. Atef El Jery and Dr. Yasser Fahmy. The aim of this visit was to identify the advanced systems ascribing to the methods and stages adopted in the storage and distribution of oil and gas. Strategic storage is located in north of Abha city in Asir region of the kingdom. This facility is supplied with petroleum products from the Jazan distribution station via a 245 km pipeline through Asir mountain ranges. The petroleum products are pumped from the storage site to the distribution station via a 7 km pipeline for local consumption since 1424 AH. Strategic storage and distribution are amongst the most important places in the region. The storage facility is well equipped with health and safety standards. This visit was a great success as our students received detail information about the facility from the integrated team that oversees the distribution process in the strategic stores. The students received a warm welcome and encouragement from the group of members of Saudi Aramco. The program began with the screening of a film about Saudi Aramco's energy from storage to distribution. The aim of Saudi Arabia is to develop a safe and secure system to ensure the protection of petroleum products and secure the needs of safe distribution of petroleum products in times of crisis and emergency.  The importance of oil and gas and their derivatives are paramount as they are used  in many vital activities such as extracting pure water from the land, desalination, civil and military transportation, and the generation of electricity on which all industries depend. As oil installations are usually subject to sabotage or natural disasters, it is necessary to consider developing a safe and efficient system aimed at protecting these facilities and providing petroleum products permanently to all vital facilities and sectors under different circumstances. The main site of the project is about 40 km north of Abha city. The pipeline runs about 240 kilometers long and has two pumping stations, pumping sea-level products to the high mountains up to 2,800 meters, through a tunnel that crosses the mountains. It contains a nuclear, chemical and biological bomb-protected area. It also contains the main control room through which all the station equipment and systems can be operated automatically and equipped with the main computers, which are connected to Saudi Aramco computers to know the size of the stored products and all environmental matters. The system is also linked to the Ministry of Defense and Aviation in Riyadh so that the Ministry is kept informed of the size of strategic stocks. In the end, the accompanying doctors expressed their thanks and appreciation to the team supervising the station for valuable information that they shared with our students.  

The participation of outstanding students in creating tutorial lessons for their poor performing colleagues is good idea towards solving their problems in subject matters and motivating them towards hard work and enhancing their class performance. It is obvious that the course instructors focus on the development and diversification of learning methods to raise the performance of students. In this context, the Department of Chemical Engineering at the Faculty of Engineering initiated this experiment and the student Mohammed Bassam Hammoud, under the supervision of Dr. Bassem Al-Alwan, offered special lessons for the students in the course of Chemical Engineering 1 in partnership with the Deanship of Student Affairs. It started from 24/02/2019 to 31/03/2019. The lectures were delivered every Sunday from 17:00 to 19:00. The lecture focused on important and useful lessons for students that will strengthen them for their next stages. The students were impressed with the lessons and the attendance exceeded 30 students. The Department of Chemical Engineering experienced this successful experience and determined to replicate the same in coming next semester.  

The Dean of the Faculty of Engineering, Dr. Ibrahim Falki, opened the activities of the 14th Scientific Research Day of the Faculty of Engineering, which included the presentation and presentation of six papers and scientific research presented by the various departments of the Faculty of Engineering, in addition to the presentation of twelve scientific posters by a number of professors and teachers. For his part, the Dean of the College stressed the importance of scientific research in the College, which raises the quality of academic performance and its development. He also urged the continuation of its presentation throughout the academic year and not limited to presentation and presentation on one day. (MA) next year, which will support and enhance the quality and quality of scientific research in the college, especially postgraduate students. At the end of his speech, the Dean of the College thanked the professors and teachers of the Faculty of Research and thanked the participants, the participants and the attendees. After the completion of the research, the Dean of the Faculty of Engineering honored the researchers and a number of participants in the day of scientific research by distributing certificates of appreciation. Then the attendees went to see a number of scientific posters participating in the activities of the 14th Scientific Research Day of the Faculty of Engineering.

The Dean of the Faculty of Engineering, in the presence of the Head of the Department of Architecture and Planning and a number of teachers and students of the department, attended two lectures at the invitation of the Department of Mathematics at King Khalid University. The first lecture entitled "Meshes in Architecture" was presented by Professor "Helmut Pottmann", the second lecture, entitled "Discrete Conformal Mapping and Riemann Surfaces Theory and Applications", was presented by Professor Alexander Bobenko. Both professors are visiting professors of KAUST. These two lectures were of particular importance to the Department of Architecture and Planning at the University because of their role in diversifying and developing the design capabilities of their ideas and creative design alternatives. On the sidelines of the lectures, the two guests exchanged views on the possibility of benefiting from their expertise in providing the Department of Architecture and Planning with information and ideas that will develop the architectural mathematics course presented in the plan to the Department of Architecture and Planning.

Under the supervision of the Excellency of the Dean and the advising unit of the College of Engineering, Professor Ahmed Al Badawi presented a lecture on 25 March 2019 regarding the definition of drugs and its types, addiction and abuse and the destruction caused due to it. A good number of faculty members and students participated in this lecture and benefited from it. In addition to dangers arising from the drinking soft beverages, he described cases of drug addicts, methods of promotion, and clarified about the dangers of digital drugs and ways of preventing them. He also praised the efforts of the state and its agencies for fighting against drug traffickers in the kingdom. He also pointed the role of media professionals in preventing the scourge of drugs. In the end, the dean expressed his happiness and thanks to the valuable information provided by the professor to protect the students from the danger of drugs and its addiction among the youth.

The COE and the Quality unit is committed to collaborate and extend all the help and expertise to the other universities of Saudi Arabia as an initiative for community service. A delegation of six members of Jizan university including the Dean of Faculty of Engineering, the Vice Dean, the Chairmen of Mechanical, Industrial, Chemical, and Electrical engineering departments visited the College of Engineering, King Khalid University on Thursday,14.03.19. The main objective of the delegation was to interact with the senior leadership of College of Engineering at KKU and the members of quality unit to find out the process of ABET accreditation and the necessary steps to prepare for it. The delegation first met the senior administration of College of Engineering including the Dean, the Vice Dean for Development and Quality and the Vice Dean for Academic Affairs. Later the delegation had a detailed meeting with the members of the quality team of COE. The quality team explained step-by-step process to approach and prepare for the ABET accreditation and the important points to take care of. All the doubts and the queries of the members of the delegation were answered in detail. After the meeting, the delegation visited the laboratories of COE and were explained about the preparations of the laboratories for onsite visit of ABET review panel. 

The IEEE Student Branch of the College of Engineering of King Khalid University Organized a three-day training workshop on “Reconfigurable Computing using Xilinx FPGA”  from 24-02-2019 to 26-02-2019. The training was conducted by Dr. Mohammed Zubair and Eng. Mohammed Sayeeduddin Habeeb of the department of electrical engineering. Twelve students participated in the training workshop.

The student branch of Institute of Electrical and Electronic Engineers (IEEE) was inaugurated by Dr. Ibrahim Idris Falqi, Dean of the College of Engineering on 16-06-1440 (21-02-2019) Thurday at the IEEE Club of King Khalid University. Dr. Mohammed Khaloofah Al Mesfer (Vice Dean for Academic Affairs), Dr. Saeed Dhafer M Alqadhi (Vice Dean for Higher Studies and Scientific Research) were Guest of Honor during the Inaugural Program. Dr. Mohammad Farrag, Chairman of the Department of Electrical Engineering Presided over the function. The Office bearers of the Student Branch for the year 2019 are as follows:   Chair : Shaker Alrajhe Vice Chair : Abdalsalam Ali Saeed Aldosari Secretary : Mohammed Almoghamer  Treasurer : Mohammed Alshehri  Student Branch IEEE counsellor : Dr. Thafasal Ijyas V. P.  

The IEEE Student Branch of King Khalid University organized a Training Workshop on “Object Oriented Programming through C++” in Electrical Engineering Lab (L2205) from 20 to 23 of January 2019. The training was conducted by Engineer Salman Mohammed Arafath of Department of Electrical Engineering. Eleven students participated. Certificates were distributed after the completion of the Training Workshop.

In the framework of sports events under the patronage of His Excellency the Director of King Khalid University and the presence of the President of the Federation of Sports Universities in Saudi Arabia, was held on Tuesday 02/19/2019 organizing the university 11th Marathon. Students, faculty members and administrative staff participated in this event. Dr. Mohamed Abdelbasset YOUSFI from College of Engineering, Department of Mechanical Engineering get the second place on the university faculty.

Due to the importance of new technologies such as Remote Sensing and Geographic Information Systems (GIS) in the design and implementation of Civil Engineering projects and Surveying. In fact, it is certain that the graduate of Civil Engineering in the College of Engineering at King Khalid University in Abha can easily take place in the labor market by gaining technical skills in specialization and self-development with the skill of these new technologies required in foreign and national companies. 2 - What are the plausible objectives of such training? To achieve the vision of the College of Engineering and the Civil Engineering Department within the vision of King Khalid University within the vision of the Kingdom of Saudi Arabia 2030 by intensifying the training courses for Graduates to prepare them to the job market or to pursue postgraduate studies and the following objectives: Strengthening the ratio of new technologies in the curriculum of College of Engineering; Training involves new technologies allows to gain time and effort during the implementation of each Civil Engineering Projects; Prepare the Graduate to the practical life without any going back after graduation to re-train; Through the community service mechanism, these skills can be introduced to serve the local government and private sectors.   3 - Benefit and Purpose of this Remote Sensing and GIS Training Due to the importance of all courses taught by the Graduate in Civil Engineering Department towards the different specializations that enable him to obtain the certificate of Civil Engineer, it is difficult to delve into any given specialization in hoe he can earn all the skills so we highlight the importance of this course and the goal in the following: To establish the importance of this course in adopting positive theory in learning; This course intersects with other courses related to the updating of Spatial data; Enabling the Graduate with the necessary skills to prepare for the adoption of these new technologies in the remainder of his University studies. In fact, graduation project inspired by the actual projects in the public or private sectors and facilitate the integration of Graduates in the labor market.   4 - New in this Remote Sensing and GIS Training This course offers the Graduate of Civil Engineering how he can develop his knowledge by taking into consideration new technologies and how to upscale to a high level of knowledge that leads him to win the future job or continue his postgraduate studies: 5 - Methodology and Procedures to follow Through this training, Graduates learn the scientific methodology and digital methods used in Remote Sensing and GIS applications. The most important of these methods are: To learn how to collect geo-spatial data from international web site; Training on how to visualize the geo-spatial data by Remote Sensing and GIS Software; Training on how to import and export geo-spatial data from each software to another; Training on how to enhance the quality of satellite images using each software; Training on how to make geo-processing using each software to produce thematic mapping; Ensure that the content of any course does not mean that you become an expert, but a first step for more improvement. 6 - Expected Results Through this Remote Sensing and GIS Training, the faculty member of this training and the Civil Engineering Department want to reach the following results: To push the Graduate to more knowledge in specialized disciplines, especially those that rely on new technologies; To instill in the Graduate the idea of perseverance and excellence in earning skills and self-development by adopting the methodology of integration between classical methods and new technologies to win the future job.

Within the framework of the Faculty of Engineering's keenness on the importance of visits, and within the framework of the visit's program for each semester, a group of students, from the chemical engineering department, was visit the PepsiCo Factory in Abha on Monday, 11/02/2019, and was accompanied by a faculty numbers  Dr. Atef Mohammed El Jery and Dr. Mohammed Ismail. The aim of this visit is to identify advanced systems in addition to the approved stages for the production of soft drinks. This plant is one of the most important factories in the region, which respects the health and the safety requirements. The visit aims to identify the advanced systems in addition to the approved stages for the production of PepsiCo soft drinks and mineral water. This plant is one of the most important factories in the region, which respects health and safety requirements. The basic processes that pass through the stages of receiving raw materials and how to store them were explained, until they are transferred to the production department, through the production and storage stages. In addition to the process of production of carbon dioxide gas as a raw material, given by engineers Saeed Hassan al-Qahtani and Ali Yahya al-Qahtani. These processes were seen on the ground and stand at every part of the production stages and explain them. This visit has had a positive impact of linking the student of chemical engineering to the national industries and the integration in the educational process. Finally, the visiting doctors expressed their thanks and gratitude to the engineers for useful and valuable information that enhances the scientific method.