Based on the plan of mechanical department for training courses, a heat treatment training course titled Heat treatment of steel has been done at Wednesday 10/10/2018. 26 students have been participated. After this training course the student will be able to: Different methods for treatment of steel Selection for the optimum methods for heat treatment of steel Control of mechanical properties of ferrous alloys by heat treatment  Source: Dr Mohammed AbdAulziz- Mechanical Engineering Department

The department of chemical engineering, King Khalid University, hosted a symposium on 7/112017 under the supervision of Dr. Atef El Jery,  coordinator of seminars and visits, Mr. Ali Al-Wadai from BADIR Program for Technology Incubators, within the joint cooperation between the faculty of engineering, government institutions and the private sector in Saudi Arabia. Mr. Ali Al-Wadai presented a scientific seminar on how the idea turned into an existing project and the role of BADIR program. The program is an extension to support the technical work and provide various support and care to develop the spirit of innovation and innovation in the technical field of the Saudi Arabia youth to help them make positive effects and innovate promising technologies that contribute to increasing productivity and diversification of sources income and create more career opportunities for young people. Mr. Ali Al-Wadai stressed that the idea is the foundation of the project. The successful and strong idea is the basis of a successful project. Then make effective steps to turn the idea into a project. He pointed out that despite the economic crises that invade the world and countries and physical instability, each of us in the desire to increase the income. But we face some problems, the first of which is the fear of starting a project and bearing its consequences. The question is, will it succeed? will it fail? will I win a lot? will I lose? All of these questions are a barrier between you and your project. In order to start your project and overcome all these problems and fears, you have to take effective steps that will enable you to start your project and turn your idea into a realistic project. The most important of these: the idea, know the strength of your idea, the search for your idea in the market, and effectiveness. One of the requirements of transforming the idea into an existing project requires: faith in the idea, hard work, management, capital, strong management… In the end, the Department of Chemical Engineering expressed its thanks and gratitude for the valuable information provided by Mr. Ali Al-Wadai. Source: Dr. Atef Jery - Chemical Eng. Department

Course in Mechanical Engineering Department: How to prepare Literature Review for Graduation Projects   Date:                      04 October 2017 (Thursday) Presented by:         Dr. Vineet Tirth, Associate Professor, MED, College of Engg. KKU Attended by:           06 Students of Level of MED Course Outline:                 The course on ‘How to prepare Literature Review for Graduation Projects’ outlines the basics of Graduation Project Report. The contents of the project report were explained to the students. The methodology to write literature review in concise and informative way was explained to the students with the examples. The citing of the references was also explained. The doubts of the students were answered. Two graduation project reports were shown to the students as case studies. Source: Dr. Vineet Tirth - Mechanical Engineering Department

A TRAINING SESSION ENTITLED: Using Microsoft Excel for Mechanical Engineering Applications A training session for the students of Department of Mechanical Engineering was organized under the title: Using Microsoft Excel for Mechanical Engineering Applications. Thursday, 24/1/1440. The session was conducted by Dr / Baiumy Taha El-Assal. The course covered following topics: GETTING STARTED ENTERING & FORMATTING DATA, NUMBERS TABLES FORMATTING CONDITIONAL FORMATTING FORMULAS CHARTING

The Department of Chemical Engineering - College of Engineering is pleased to announce the organization of a scientific seminar on the Badir program for technology incubators entitled "How to turn the idea into an existing project and the role of Badir program" present by the famous lecturer in  Saudi Arabia Saeed Shahrani, on Tuesday 09 October, 2018, office 145 at 11am. Your idea is the foundation of the project, and the successful and powerful idea is the basis of a successful project. Students and faculty members are invited to this lecture, the effective steps to turn your idea into a project. For more information, contact the seminar coordinator Dr. Atef El Jery, office 101. Source: Dr. Atef EL Jery - Chemical Eng. Department

The Engineering Club of King Khalid University organize an event to welcome fresher students. The interaction between students and the Dean of College of Engineering, Dr. Ibrahim Idris Falqi and the Vice Dean, Dr. Mohammed Al Mesfer were take place. The student activities were inaugurated for this year (1439-1440) under the patronage of the Dean of the College. Source: Eng. Waleed Mahjary- Engineering Club

The Department of Chemical Engineering, organized a meeting with graduate students on Tuesday morning, 08/01/1440. The faculties of the department reviewed the progress of student's graduation projects during the second semester of the academic year 38-1439. The students presented their projects with motivation and confidence . They affirmed to complete the rest work before the deadlines set by department in academic year 39-1440. These projects focused on design aspects . It is hoped that their project will contribute towards serving the community. Source: Dr. Atef Jery - Chemical Eng. Department

Under the high supervision of the Dean Dr. Ibrahim Idris Falqi, the written exam for teaching assistant posts as announced for academic year 1439-40 was held on 06/01/1440.  All the necessary measure were taken for smooth conduction of the examination. Source: Dr. Atef Jery - Chemical Eng. Department

With the presence of Dr. Fawzi Al-Askari, Head of Mechanical Engineering Department, on Monday  September 10th 2018 At 12 p.m in the room 145  a meetings were held with students of the Faculty of Engineering (Mechanical Engineering) involved in new graduation projects. Faculty staff members presented their proposals for the first semester 391. After the students have selected their projects, the meeting have been ended at 1 p.m. Source: Graduation project unit - Dr. Mohamed Abdelbasset  

Within the framework of the Faculty of Engineering's keenness and approval from the dean of the college Dr. Ibrahim Al-Falki. A group of graduates students of Chemical Engineering Department visited to Aramco in Ras Tanura on 11-13/04/2018 under the supervision of Dr. Atef El Jery and Dr. Yasser Fahmy. The aim of the visit includes  identifying advanced systems oil and gas production. This plant is one of the most important biggest plant in the region, fulfilling health and safety requirements. We were welcomed by a group of members of the Public Relations Department of Saudi Aramco. The program began on Thursday 12/04/2018 with the screening of a film about energy in Saudi Aramco under the slogan "This Saudi Aramco - Energy for the World". In a presentation given by the executive director of four oil refineries in Saudi Arabia, engineer Suleman Al Bargan, stressed the  programs of communication with the community in Saudi Arabia and indicated the role of citizenship and the company's record in communicating with the community and the environment, and also briefed the students on the stages of exploration and drilling of oil using latest technology. The oil paved the way for unprecedented events in the field of oil exploration and leading to change the world. He spoke of the flexibility that Aramco has in providing opportunities amidst the challenges in the oil and gas industry. The company has maintained its long-term integrated strategy, supporting capital efficiency sustainable investment, the development of technology, and the enhancement of human resources. The company's mission is to provide energy to the Kingdom and the world in a reliable manner, as well as to progress in its efforts to become the largest company in the world. The executive director added that the company will continue to expand its customer base in the international markets by increasing the number of customers on the one hand and expanding the geographical scope to include new countries where they had never been present. In the field of refining, processing and marketing, the company's executive director pointed out that the company's plan to integrate the refining network with the production facilities of chemicals and industrial complexes hosting the associated value has reached an advanced stage with the starting the chemical company. He also point out that work is being completed quickly to finish Jazan refinery project at an accelerated pace. He said that the Ras Tanura Refinery won the Emerson International Trust Award for Best Reliability Program as the first company in the Middle East being presented this award. The company's Traffic Safety Program received the Best Public Awareness Campaign, and the Environmental Education Program received the best responsibility initiative Social. After those, the students received a through training by engineer Imed Ghamdi composing all the stage from receiving and sorting the raw materials until the final product. And then we went  to visit  the labs for understanding. We took lunch all together in the presence of the executive director of oil refineries. The  executive director expressed his happiness by meeting us and urged students to increase their efforts and work for this country. This visit must have a positive impact for connecting the students of chemical engineering with the national industries in the country and integrating the educational process. And in the end of this visit the supervisors expressed their thanks and gratitude for the contribution of Aramco through its employees and through the accompanying engineer Imed Al-Ghamdi for the useful information and the value of strengthening the scientific approach program.

The 13th Scientific Research Day was held on Monday 16/7/1439 under the supervision of the Deanship of Scientific Research and the College of Engineering represented by the College Research Center. The beginning of the program with recitation from the Holy Quran, then the Dean of the Faculty of Engineering D. Ibrahim Falqi made a speech in which he praised the role of scientific research and its impact on the achievement of the vision of the Kingdom 2030. The 13th Research Day included two sessions. The first session was chaired by the Head of the Advisory Unit at the College of Engineering, Dr Wael Aboneama. The session comprises of 5 speakers from the Civil Engineering, Electrical Engineering and Chemical Engineering departments. The second session was chaired by the Undersecretary of the Faculty of Engineering for Quality Dr Ali Issa Mohammed Anqi Supervisor of the Scientific Journals Unit at the University. It included five papers from the departments of Civil and Mechanical Engineering. The Director of the Research Center of the College, Dr. Ihab Mohamed Taha Shigidi closed the event of the day by thanking to the Deanship of Scientific Research and the Dean of the Faculty of Engineering, wishing all the best.

Program Schedule Time Title Speaker Department 8:30 to 9:00 Registration 9:00 to 9:15 Welcoming Speech, College of Engineering Dean’s 9:15 to 9:30 Dr Salem Algarni The Environmental Impact of Fluoride Emissions from Aluminum smelter at Jazan Economic City (JEC), Baish, Saudi Arabia on the surrounding Ecosystem Muhammad Arshad ChE 9:30 to 9:45 Design of a Smart Guyed Mast to Mitigate Earthquakes Mohamed Hechmi ELOUNI CE 9:45 to 10:00 Effect of Liquid Forging Process Parameters on Properties of Cast Metals and Alloys Vineet Tirth ME 10:00 to 10:15 Green Siliceous Concrete Materials for Sustainability using an Integrated MCDM Approach Mohd. Ahmed CE 10:15 to 10:30 Universal Fuzzy Logic Controller and application of Genetic Algorithm for tuning of scaling factor for real-life dynamic systems Mohammad Fazle Azeem EE 10:30 to 10:45 Coffee Break 10:45 to 11:00 Dr Ali Anqi Evaluating the Precipitation-Topography Relationship and Precipitation Gradient Using Non-Stationary Modelling Technique in Aseer Region, Saudi Arabia Javed Mallick CE 11:00 to 11:15 Computationally Efficient Equalization Techniques for High Mobility OFDMA Uplink Systems Thafasal Ijyas V. P. EE 11:15 to 11:30 Fracture Characteristics And Size Dependent Effects Of Fibre Concrete Composites Sivakumar Anandan   CE 11:30 to 11:45 Investigation on the influence of errors on the chatter vibrations during Drilling operation Amir Kessentini   ME 11:45 to 12:00 Impact of Hazardous Wastes on Human Health & Preventive Measures for a Sustainable Environment Mohd Abul Hassan CE 12:00 to 12:15 Closure 1:30 Lunch

Visit of Faculty of Engineering, Mechanical Engineering Department, Dr. Ali Mohammed Al Khuzaim, Dr. Fawzi Al Askari, Dr. Ibrahim Al Sisi, To discuss areas of joint cooperation and honoring the members of the Advisory Committee at the College of Engineering from the Technical College Engineer Salem Saleh Al-Ghamdi and Engineer Ibrahim Mohammed Mervat.

University Rector, Dr. Faleh Al-Solamy, concluded the Fourth Annual Olympic Games, which were held by the Deanship of Student Affairs, represented by the Sports Activities Department. The College of Engineering was handed the Olympic Cup for the football championship and the shield and flag for the Fourth Sports Olympic Games after narrowly defeating the Faculty of Pharmacy in a penalty shoot-out in the presence of many senior leadership figures and crowds of supporting students. During the closing ceremony, event and tournament winners received awards and certificates. The Faculty of Engineering came in first place in the football league and secured the Fourth Olympic Sports Shield flag and championship cup.

The training course took place in a very comfortable conditions and the students who were present with great enthusiasm and interest followed "Introduction to Rock Mechanics", which is considered as an important part of geotechnical field. The audience was more than expected. The attendees have discovered another discipline, which differs completely from Soil Mechanics. It is focused on the discontinuities rather than on the rock matrix, and is based on the theory of discontinua and that of the blocks, which confer the Rock Mechanics its main originality. The rock mass classification system has also attracted their attention since the philosophy and the principle are unique and fare from those of Soil Mechanics.

Within the framework of the Faculty of Engineering's keenness on the importance of visits and within the framework of the program, field visits for each semester, a group of students from the Department of Chemical Engineering visited the Al-Jazeera Paints Company in Khamis on Monday 12/3/2018, and was accompanied by a faculty number  Dr. Atef Mohammed El Jery. The aim of this visit is to identify advanced systems in addition to the approved stages for the production of paints of various types. This plant is one of the most important factories in the region, which respects health and safety requirements. The production line is based on automatic production technology and the production value is 400 million tons/year of all kinds of paints. The basic processes through during the receiving and sorting stages of the raw material were explained until the final product was presented by Eng. Yahya Al Shahrani and then he took the students to see these processes on the ground and to stand at every part of the production stages and explain them. This visit has had a positive impact, because  of linking those the chemical engineering students by the manufacture of paints in the country and integration in the educational process. At the end of the visit, Dr. Atef El Jery expressed his thanks and gratitude to Eng. Ismail Al-Ahmari, Director of Al-Jazeera Paints Academy for his good reception. He also thanked Engineer Yahya Al Shahrani for useful and valuable information which enabled him to promote the new scientific approach.

Within the framework of fruitful cooperation between the Faculty of Engineering and Community Institutions, the students of the graduation project under the supervision of Dr. Ahmed Said Abdel Hafez Zedan, the sewage purification and treatment plant in Abha city on Tuesday, 6-3-2018. The students were received by the station's officials and the director of the station. The students and the project supervisor were accompanied to the meeting hall at the station. One of the engineers of the station presented a PowerPoint presentation and explained the components of the station and the water treatment methods used in the station. A team of station engineers brought the students to visit the station sections and provide an explanation to the students. The students went with the engineers of the station to visit the pumping station, which is about 2 km away from the treatment station. During the visit, they got to know all the details of the pumping station, as well as the site of the transformer unit and the generator unit serving the station. At the end of the visit, the students expressed their happiness with the visit and the scientific benefit of the visit.

At the launching ceremony of the Saudi Resources Network for Open Educational Resources (Shams), which was sponsored by His Excellency the Minister of Education, Dr. Ahmed bin Mohammed Al-Issa, and organized by the National Center for e-Learning (NCeL) at the Ministry of Education, King Khalid University received five awards in numerous categories at the level of national universities. His Excellency Rector Al-Solamy expressed his profound contentment with the university's achievement of a number of excellence awards in the field of e-learning. The Vice Dean for Academic and Educational Affairs, Dr. Saad Al-Dajjam, commented that these awards are the result of the continuous work and cooperation between the Deanship of e-Learning and the rest of the university faculties in enriching electronic content. On the individual level, Dr. Amir Mohammed Kessentini, Assistant Professor at the Faculty of Engineering, received the Excellence Award in e-Learning for national universities in the production category. Dr. Halima Al-Saidi from the Faculty of Science also won the Excellence Award in e-Learning in the same category. On this occasion, the Dean of e-Learning, Dr. Fahad bin Abdullah Al-Ahmari, congratulated the Rector and all of the university's employees on this achievement. He emphasized that these achievements are deeply rooted in teamwork and advanced technical capabilities with a drive to succeed. The e-Learning Excellence Award in its current edition is dedicated to the National Open Learning Content Program, which is supervised by the NCeL. The participation of educational institutions from universities and education departments has resulted in providing more than 80,000 educational resources currently available on Shams. This award aims to spread the culture of excellence in e-learning and to improve it; most prominently, in relation to open educational resources. The award included three branches: the first was the Excellence Award in e-Learning for Educational Institutions; the second was the Excellence Award in e-Learning for Shams Representatives; and the third was the Excellence Award in e-Learning for Governmental, Private, and Volunteer Institutions.

The Department of Civil Engineering held Advisory Board meeting for discussing the proposed New Curriculum and Accreditation concerns. The External Board members were presented the New Curriculum to obtain their feedback. The major concerns of the industry regarding the graduates of Civil Engineering were also discussed and noted. The meeting was held on 08/02/2018 in New Campus King Khalid University. The team members representing the Department of Civil Engineering comprised of Dr. Nabil Ben Kahla (Chairman, Department of Civil Engineering), Dr. Javed Mallick, Dr Sivakumar Anandan, Dr. Ram Karan Singh, Dr. Mohamed Hechmi El Ouni and Engr. Roohul Abad Khan.

Within the framework of the Faculty of Engineering's keenness on the importance of visits, and within the framework of the visit's program for each semester, a group of students, from the chemical engineering department, was visit the Solb Steel society in Jazan on Tuesday 14/02/2018, and was accompanied by a faculty numbers  Dr. Atef Mohammed El Jery and Dr. Mohammed Arshad Nader Khan. The aim of this visit is to identify advanced systems in addition to the approved stages for the production of steel and iron. This plant is one of the most important factories in the region, which respects the health and the safety requirements. The production line was based on electro-shock technology.  and the production value is one million tons per year of coils and iron bars. The basic processes during the receiving and sorting stages of the raw materials were explained until the final product was presented by engineer Abdul Aziz Al Quraishi. then he took the students to see these processes on the ground and stand at every part of the production stages and explain them. This visit has had a positive impact, because of linking those the student to the national industries. Finally, the visiting doctors expressed their thanks and gratitude for the useful information provided by the engineer, which enhances the scientific method.